Views: 0 Author: Site Editor Publish Time: 2026-11-16 Origin: Site
Heated anti-fog insulated glass doors are professional glass components specially designed for commercial freezers, refrigerated display cases, flower fresh-keeping cabinets and other refrigeration equipment. Combining the thermal insulation performance of insulated glass with electric defogging function, they adopt double-layer tempered glass embedded with transparent ITO conductive film or ultra-fine heating wires. The built-in heating system raises the glass temperature actively to stop condensation and frost.
This product solves the core pain point of fogging and dew formation on traditional freezer glass doors caused by temperature difference, which blocks product visibility. It is widely used in supermarket refrigerators, convenience store beverage coolers, cake display cabinets and flower preservation cabinets, serving as a key part for clear merchandise display and energy-efficient operation.
Dongguan Mingda Glass Co., Ltd. focuses on R&D and manufacturing of heated anti-fog insulated glass doors, electric heating glass and other customized glass products, delivering premium products and tailored solutions for global clients.
What does it bring to your refrigeration equipment? Our heated insulated glass door delivers three core values: clear view, tight sealing, zero fog. Ordinary glass doors for beverage cabinets, dairy cases and cake display units usually have three drawbacks:
Cold air leaks out through gaps, leading to high power consumption and poor cooling effect
Fog covers the glass and ruins product display
Inner glass frosts up and blocks sight
Our heated anti-fog glass solves these two main problems:
✅ Insulation: The insulated cavity (fillable with argon gas) works like a thermos, cutting heat exchange and reducing cold loss and energy cost.
✅ Electric heating: Transparent conductive layer inside the cavity heats the glass surface above the dew point, so water vapor cannot condense.
Simply put, it is an insulated, self-heating, fog-free glass door. It keeps goods visible all day for display cabinets and allows operators to observe inventory inside walk-in coolers through viewing windows.
1. Working Principle
1.1 Insulated Glass Structure
The heated anti-fog door uses double or multi-layer tempered glass. The air cavity between glass panels is normally 6–12 mm, which can be filled with dry air or inert gas such as argon gas to lower heat transfer coefficient for superior thermal insulation.
Key functions of this insulated construction:
Thermal insulation: Reduce heat exchange between inside and outside the cabinet, minimize cold loss and improve energy efficiency
Less internal frosting: The inner glass temperature stays close to cabinet temperature to avoid frost buildup
Lower power consumption: Less cold leakage reduces compressor running load
1.2 Electric Defogging Principle
Based on insulated glass structure, the electric heating layer is integrated inside the cavity. Transparent ITO conductive film or ultra-fine metal heating wires generate uniform Joule heat after power on. The glass surface temperature rises to 35–40 ℃, higher than ambient dew point, so condensation is prevented.
Two mainstream heating types:
Heating Type | Heating Element | Features |
ITO Conductive Film | Indium tin oxide transparent coating | Fully invisible, light transmittance ≥85%, premium appearance |
Heating Wire | Extra-fine tungsten / constantan wire embedded | Stable heating, adjustable power, suitable for large-size panels |
2. Key Advantages
2.1 Anti-Fog & Anti-Frost, Stable Merchandise Display
With combined insulated cavity and electric heating layer, the glass stays clear under refrigeration (0~10 ℃) and freezing (below -18 ℃) working conditions. Surface temperature maintains 35–40 ℃ after heating starts, clearing over 90% fog in 20 seconds and eliminating dew and frost caused by temperature gap.
2.2 Thermal Insulation & Energy Saving
Double insulated glass blocks heat transfer and prevents cold leakage. Under test condition: ambient 25 ℃, RH 75%, cabinet -20 ℃, the glass remains frost-free. Combined with low-power heating design (~0.05 kWh/㎡·h), it achieves obvious overall energy reduction.
2.3 Safe & Reliable for High-Humidity Environment
Tempered glass base: Higher impact resistance than ordinary glass; crumbles into granular fragments when broken
IP44+ waterproof grade: Heating layer fully insulated and encapsulated for humid refrigeration space
Overheat protection: Automatically adjusts output once reaching threshold for safe operation
2.4 Smart Temperature Control, Automatic Operation
Supports smart temperature control and auto start-stop. Heating power adjusts dynamically according to ambient temperature and humidity to save energy while keeping anti-fog performance. High-end versions can connect with humidity sensors for on-demand heating only.
3. Application Scenarios
3.1 Supermarket & Retail
Widely fitted on supermarket coolers, convenience store beverage cases, dairy cabinets and fresh food display counters. Clear glass ensures shoppers can view products easily, while insulation and heating keep the view free of dew all day.
3.2 Cake & Flower Display Cabinets
For cake cases, flower fresh-keeping cabinets and ice cream display freezers. The heating system prevents fog in high-humidity surroundings so food and floral products keep perfect display appearance.
3.3 Cold Chain & Walk-in Cooler View Windows
Applied in back-loading walk-in coolers and cold chain transfer rooms. Multi-layer insulated glass plus heating function stays frost-free even at -40 ℃ ultra-low temperature for clear stock monitoring.
3.4 Special Commercial Refrigeration Equipment
Wine cabinets: Maintain clear view and protect wine quality Pharmacy refrigerators: Visual monitoring for medicine storage Cold chain transport units: Operating range -35 ℃ ~ -60 ℃
4. Product Options & Customization
Category | Items | Details |
|---|---|---|
✅ Standard features | Custom sizes | Commonly 24 × 75" / 30 × 79" |
Glass construction (Cooler) | 2-pane tempered glass, argon gas filled, with heater | |
Glass construction (Freezer) | 3-pane tempered glass, argon gas filled, with heater | |
Shaft & hinges | Standard shaft & hinges, stainless steel material | |
Frame profile | Aluminum alloy profile | |
Installation frame | 26mm installation frame | |
Controller | Freezer temperature controller | |
Door function | Door hold-open and self-close | |
Seal | TPE magnetic gasket | |
Handle | Full length handle | |
Light | ERC light | |
Warranty | 6-year warranty | |
➕ Optional features | Heating type | Optional heating wire |
Handle | Independent short handle | |
Lock | Optional door lock | |
Aluminum profile color | Black / silver aluminum profile | |
Branding | Custom logo available | |
Light switch | Push-button type light switch | |
Stopper | Optional 90° soft stopper | |
Hinge direction | Reversible opening |
5. Safety & Maintenance Guidelines
Clean with soft cloth and neutral detergent; avoid scratching conductive coating or heating wires
Power supply must match rated voltage (normally 12V–440V DC or 12V–110V AC). Overvoltage will damage the heating system
Periodically check wiring connection and sealing condition
Stop use immediately if heating failure or glass breakage occurs
